Sakerplus® Damaged Bolt And Screw Extractor

Home > Hand Tools > Damaged Bolt And Screw Extractor

7 Reasons This 39-Piece Extractor Set Makes Damaged Fasteners Easier to Remove

By Emily Carter, Automotive Tools Editor

18/10/2026

If a rounded bolt keeps slipping… if rust turns a simple repair into a fight… if a stripped screw just spins while your project stalls…

Then this 39-piece damaged fastener extractor set gives you a practical way forward—combining bolt extractors, screw extractors, drill bits, adapters, and accessories in one organized case for more controlled removal of stubborn fasteners.

1. Puts a Complete 39-Piece Extraction Kit in One Case

Damaged fasteners rarely fail in exactly the same way. One job may involve a rounded nut, while the next calls for drilling into a stripped or broken screw.

The Sakerplus set combines bolt extractors, screw extractors, drill bits, and useful adapters so you can choose the right removal approach without piecing together several separate kits.

“I had a couple of rounded bolts holding up a repair, and having the different extractor sizes together made the job much easier. I found the right fit quickly and finally got moving again.”

- James W.

2. Precision Spiral Flutes Grip Rounded and Stubborn Fasteners

Standard sockets can lose their hold once a bolt or nut is rounded, rusted, or badly worn, making every turn more frustrating.

The extractor sockets use precision spiral flutes for stronger gripping power, helping the tool bite into damaged fasteners as you turn instead of relying on clean factory edges.

“The spiral-flute sockets are the part I use most. They bite into rounded heads much better than a regular socket, especially when the fastener is already too damaged for a clean grip.”

- Michael T.

3. Handles Stripped, Broken, and Damaged Screws More Efficiently

When a screwdriver can no longer grip the head, forcing it harder can leave even less material for the next tool to catch.

This set includes screw extractors and matching drill bits for damaged screws, giving you a dedicated removal method when ordinary drivers and bits can no longer get a secure hold.

“I like that the screw extractors and drill bits are matched in the same kit. When a screw head is too damaged to grab, I can drill the pilot hole and move straight to extraction.”

- Ethan Walker

4. Covers Small Screws Through Larger Nuts Across Repair Jobs

Different repairs call for different fastener sizes, so a narrow extractor set can leave you stuck when the next damaged bolt is just outside its range.

The kit is shown handling screws from 2–12 mm and nuts up to 21 mm, making it useful for automotive repairs, machinery maintenance, home projects, and common workshop tasks.

“I bought it for garage work, but I have already used it on a few different repair jobs. The range of sizes makes it useful whenever a stubborn nut, bolt, or screw shows up.”

- Olivia Carter

5. Keeps Every Extractor Size Organized, Protected, and Ready

A removal kit is only useful if you can quickly find the right size when a damaged fastener stops the job.

The compact classified carry case keeps the extractors, drill bits, and adapters in dedicated positions, while the case measures about 29.5 × 19.5 cm (11.61 × 7.68 in) for practical storage and transport.

“The case is compact, labeled, and easy to carry. I can see the sizes at a glance instead of digging through loose sockets and bits every time I need an extractor.”

- Daniel Brooks

“This is one of those kits I wish I had before the first rounded bolt ruined an afternoon. The size range, spiral grip, and organized case make it a useful backup for stubborn repairs.”

Jessica Miller

Verified Buyer

6. Trusted by Over 47,000+

Built for the repair problems ordinary sockets and screwdrivers cannot solve, this extractor set combines multiple removal tools in one compact case so the right option is ready when a fastener is stripped, rounded, rusted, or damaged.

“This is one of those kits I wish I had before the first rounded bolt ruined an afternoon. The size range, spiral grip, and organized case make it a useful backup for stubborn repairs.”

Jessica Miller

Verified Buyer

39-piece complete extractor set

Precision spiral flute grip

* Results may vary depending on fastener condition and tool use.

7. How to Use Your Extractor Set (3 Simple Steps):

01

Choose the Closest Size

Select the extractor or drill bit that best matches the damaged fastener.

02

Seat the Tool Securely

Fit the extractor firmly; drill a pilot hole first when the screw requires it.

03

Turn Counterclockwise Slowly

Apply steady reverse torque until the damaged bolt, nut, or screw releases.

Why Choose Sakerplus Damaged Bolt And Screw Extractor

A complete 39-piece setup combines spiral-flute bolt extractors, screw extractors, drill bits, useful adapters, and organized storage—giving you more ways to tackle damaged fasteners with one kit.

Feature	Sakerplus® Damaged Bolt And Screw Extractor	Basic Extractor Sets
Extractor Coverage	Bolt, screw & drill extraction tools in one kit	Often focused on a single extractor type
Spiral Flute Grip	Precision flutes grip rounded & stubborn fasteners	Basic gripping surfaces may slip on damaged edges
Fastener Range	Handles 2 mm screws through 21 mm nuts	Smaller sets can require extra sizes
Material Selection	CR-MO bolt extractors with HSS components	Material selection varies by basic set
Tool Connection	Includes adapters for drill & hand-tool use	Fewer connection options may be included
Organized Storage	Classified carry case keeps sizes easy to find	Loose pieces are easier to misplace

It's Going Viral on Social Media

Andrew Collins

27 days ago

Verified

Used the spiral-flute socket on a rounded fastener and it finally gave me enough bite to move it. Definitely easier than fighting it with a regular socket.

Sophia Martinez

14 hours ago

Verified

The screw extractors and drill bits are the part I wanted most. Everything is organized together, so I can go from drilling to extraction without hunting for another kit.

Brandon Hughes

16 hours ago

Verified

Nice having coverage from small damaged screws up to larger nuts. The case makes the different sizes easy to see and grab.

Donald Cooper

2 days ago

Verified

The included adapters are useful when I want to switch between a cordless drill and hand tools. It feels like a much more complete setup than my old extractor set.

The Simple Way To Tackle Damaged Fasteners—Without Sacrificing Regular Sockets Or Stalling Your Repair

The Sakerplus extractor set brings bolt extractors, screw extractors, drill bits, and adapters together in one organized case, so rounded, stripped, rusted, or broken fasteners are easier to approach with the right tool.

UP TO 50% OFF

FOR A LIMITEDTIME ONLY!

This limited-time deal is in high demand and stock keeps selling out.

GET 50% OFF →

Try it today with a 90-Day Money Back Guarantee!

Comments

James W.

Has anyone used the spiral-flute sockets on rounded bolts? That is the main reason I am looking at this set.

4

Like

Reply

55 min

@James W.

Michael T.

Yes. I used the closest-fitting size and applied steady reverse torque. The spiral shape gave me a much better grip than the regular socket I had already rounded it with.

7

Like

Reply

16 min

Olivia Carter

I like that the screw extractors and drill bits are stored in the same case. It saves me from digging through separate boxes when a screw head is already damaged.

4

Like

Reply

2 h

Daniel Brooks

Does it cover smaller screws too, or is the set mainly for bolts and nuts?

3

Like

Reply

11 h

@Daniel Brooks

Jessica Miller

It covers both. The product sizing shows screw extractors for 2–12 mm screws, while the bolt extractor range reaches up to 21 mm.

7

Like

Reply

2 h

Ethan Walker

The labeled carry case is a bigger deal than it looks. I can grab the right size quickly instead of sorting through loose sockets and bits in the middle of a repair.

4

Like

Reply

5 h